wiegand Module¶
Since | Origin / Contributor | Maintainer | Source |
---|---|---|---|
2020-07-08 | Cody Cutrer | Cody Cutrer | wiegand.c |
This module can read the input from RFID/keypad readers that support Wiegand outputs. 4 (keypress) and 26 (Wiegand standard) bit formats are supported. Wiegand requires three connections - two GPIOs connected to D0 and D1 datalines, and a ground connection.
wiegand.create()¶
Creates a dynamic wiegand object that receives a callback when data is received. Initialize the nodemcu to talk to a Wiegand keypad
Syntax¶
wiegand.create(pinD0, pinD1, callback)
Parameters¶
pinD0
This is a GPIO number (excluding 0) and connects to the D0 data linepinD1
This is a GPIO number (excluding 0) and connects to the D1 data linecallback
This is a function that will invoked when a full card or keypress is read.
The callback will be invoked with two arguments when a card is received. The first argument is the received code, the second is the number of bits in the format (4, 26). For 4-bit format, it's just an integer of the key they pressed; * is 10, and # is 11. For 26-bit format, it's the raw code. If you want to separate it into site codes and card numbers, you'll need to do the arithmetic yourself (top 8 bits are site code; bottom 16 are card numbers).
Returns¶
wiegand
object. If the arguments are in error, or the operation cannot be completed, then an error is thrown.
Example¶
local w = wiegand.create(1, 2, function (card, bits)
print("Card=" .. card .. " bits=" .. bits)
end)
w:close()
Wiegand Object Methods¶
wiegandobj:close()¶
Releases the resources associated with the card reader.
Syntax¶
wiegandobj:close()
Example¶
wiegandobj:close()